"scan_title_label" = "Scan nearby devices";
"scan_stop" = "Stop scanning";
"start_scan" = "Start scan";
"serial_number_label" = "Serial No. :";
"logical_id_label" = "Logical ID :";
"rssi_label" = "RSSI :";
"rssi_unit" = "dbm";
"line" = "Line";
"voltage" = "%1$.2f v";
"current" = "%1$.2f A";
"powerFactor" = "%.0f";
"verify_pa_title_dialog" = "Attention! Risk of electrocution!";
"verify_pa_confirmation_message" = "Before starting the PA, consider the necessary safety measures to avoid any danger to the intervention team on the electric lines coming out of the PA!";
"add_child_devices_by_qr" = "Add PA device by scanning QR";
"add_child_devices_by_hspl_scan" = "Add PA device by antenna";
"check_st" = "Check the signal strength or functionality of the Service Tool.";
"case_opened" = "Box opened";
"case_closed" = "Box closed";
"all_off" = "Turn off all";
"all_on" = "Turn on all";
"check_pa_installation" = "Check PA %s installation";
"phase_1" = "Phase L1";
"phase_2" = "Phase L2";
"phase_3" = "Phase L3";
"status_do" = "DO Status";
"replace_device_command_name" = "replace device command";
"no_injection" = "The %1s %2s device through which the communication attempt was made is not responding!<br/>Ensure you are near it, check the power supply, and try to re-establish communication.<br/><br/>If the error persists, try replacing the device.";
"no_injectio_clean" = "The %1s %2s device through which the communication attempt was made is not responding! Ensure you are near it, check the power supply, and try to re-establish communication. If the error persists, try replacing the device.";
"start_beacon_message" = "Do you want to start the beacon signal for the selected device?";
"stop_beacon_message" = "Do you want to stop the beacon signal for the selected device?";
"register_device_again" = "Do you want to re-register the selected device?";
"register_device" = "Do you want to register the selected device?";
"reset_device" = "Reset device";
"hspl_scan" = "Scan HSPL";
"reset_device_dialog" = "By performing the reset operation, the device will revert to factory settings and lose its identity on the network level. <br/><br/> To reintroduce the device into the communication line, you need to reinstall it.";
"restart_device_dialog" = "Restarting the device operation restores its functions without other system-level implications.";
"restart_device" = "Restart device";
"registerDeviceAgain" = "Re-register device";
"reinstallDevice" = "Reinstall";
"addDeviceToCurrentLine" = "Install device and to the current line";
"startBeacon" = "Start beacon signal";
"stopBeacon" = "Stop beacon signal";
"activate_bluetooth" = "To continue, you need to activate your phone's Bluetooth.";
"congrats" = "Congratulations!";
"cms_installation_finished" = "Server installation has been successfully completed.";
"next_installation_step" = "To continue, you need to scan a Repeater.";
"charge_battery" = ". BATTERY NEEDS TO BE CHARGED.";
"line_already_started" = "Line %d has already started.";
"selected_line" = "Current line PA%d";
"current_pa_installation" = "Installation %s";
"install_home_line_already_started" = "Line %d has already started. Do you want to continue the installation?";
"start_beacon" = "Do you want to restart the beacon signals for line %d?";
"stop_beacon" = "Do you want to stop the beacon signals for line %s?";
"starting_point_of_communication_line" = "The communication line is not started for the selected PA. Do you want to start the line from the server or do you want to choose another starting point from the map?";
"starting_point_of_communication_line_after_trim" = "The communication line has been completely erased. Do you want to start the line from the server, choose another starting point from the map, or select another working line?";
"confirmation_starting_point_cms" = "The communication line will start from the server.";
"details_starting_point_cms" = "By default, the communication line to the PA starts from the main antenna (server). <br/> Check if it's possible to install another PA that you can reuse later as a connection point to the main antenna.";
"starting_point_cms_or_other_line_selection" = "The communication line has been completely erased. Do you want to start the current communication line from the server or do you want to select another working line?";
"start_communication_line_from_cms" = "The communication line is not started for the selected PA. Do you want to start the line from the selected node?";
"start_line_command_name" = "Start communication line command";
"stop_line_command_name" = "Stop communication line command";
"resume_line_command_name" = "Start beacon signals command";
"suspend_line_command_name" = "Stop beacon signals command";
"register_device_command_name" = "Device registration command";
"register_pa_child_device_command_name" = "PA child devices registration command";
"finish_line_command_name" = "Finish communication line command";
"trim_line_command_name" = "Trim communication line command";
"reset_device_command_name" = "Device reset command";
"restart_device_command_name" = "Device restart command";
"reregister_device_command_name" = "Device reregistration command";
"start_beacon_command_name" = "Start beacon signal command";
"stop_beacon_command_name" = "Stop beacon signal command";
"change_location_command_name" = "Change node location command";
"insert_new_node_command_name" = "Insert new node after selected node command";
"read_fw_command_name" = "Read firmware command";
"scan_devices" = "Scan devices";
"scan_nearby_devices_label" = "Scan nearby devices";
"reinstall_device" = "The device has been successfully reset! Do you want to reinstall the device?";
"affected_line_by_device_reset" = "Line %1s has been affected and cannot establish connection with %2s. <br/><br/>Recommendation: reinstall the device.";
"affected_lines_by_device_reset" = "Lines %1s have been affected and cannot establish connection with %2s. <br/><br/>Recommendation: reinstall the device.";
"executing_custom_command_label" = "Executing command %s...";
"retry_previous_command_label" = "Retrying previous command...";
"injection_acknowledge_received" = "Acknowledgment received from injection node. Sending command to server...";
"install_error_dialog_title" = "Devices could not be added to the system";
"install_error_dialog_message" = "Recheck device installation and retry connection validation.";
"install_error_see_instructions" = "Installation Instructions";
"install_error_check_connection" = "Check Connection";
"install_error_restart" = "Restart Installation";
"select_communication_line" = "Select Communication Line";
"select_mipl_communication_line" = "Select Communication Line for Lamps";
"view_communication_line" = "View Communication Line";
"start_pa_installation" = "Start %s installation";
"continue_pa_installation" = "Continue %s installation";
"generic_install_pa" = "Install PA";
"cms_note" = "The lighting system installation always starts from the main antenna (server). Mount and scan a %s device, which represents the starting point in communication with the following devices.";
"line_note" = "To continue, you need to select the appropriate PA for the line you want to work on!";
"error_install_no_open_slot" = "The device cannot be saved. Slot does not exist. Please contact the system administrator.";
"battery_level" = "Service Tool is connected. Battery level is: ";
"disconnect_error" = "Connection to Service Tool could not be established. Please check if it is powered.";
"restart_succes" = "Device has been successfully restarted!";
"reset_succes" = "Device has been successfully reset!";
"service_tool" = "Service Tool";
"service_tool_disconnected_status" = "DISCONNECTED";
"service_tool_connected_status" = "CONNECTED";
"no_barcode_input" = "You must enter a code to validate!";
"wrong_service_tool_input" = "The scan code does not belong to a Service Tool. Try manual input!";
"wrong_device_sn_input" = "The scanned code does not belong to a device. Please try manual input!";
"firmware_update" = "Firmware Update";
"read_firmware_version" = "Read Firmware Version";
"read_firmware_version_details" = "Do you want to read the firmware version for device %s of type %s?";
"firmware_update_message" = "Do you want to update the firmware for device %s of type %s?";
"install_mipl" = "Install MIPL";
"scan_mipl" = "Scan MIPL modules";
"install_mipl_per_line" = "Install MIPL per line";
"line_numbers_node_selected" = "The selected node belongs to the following communication lines. \nSelect the line you want to use.";
"install_lamps" = "Lamp Installation";
"add_lamps" = "Add Lamps";
"no_mipl_support" = "Adding MIPL devices is done from the existing option on the node.";
"no_child_registration" = "Registration failed. Device type:";
"line_already_exist" = "The line already exists. Please contact the administrator.";
"calibrate_values" = "Calibrate Values:";
"currentSymbol" = "• I:";
"voltageSymbol" = "• U:";
"currentMeasure" = "A";
"voltageMeasure" = "V";
"voltageSet" = "Set V";
"currentSet" = "Set A";
"commandSuccess" = "Command sent successfully!";
"channelError" = "Channel Error";
"calibrateError" = "Calibration Error.";
"calibrateErrorValue" = "Calibration Error: %d";
"readMctInfoErrorValue" = "Error reading MCT!";
"calibrateSuccess" = "Calibration successful!";
"target_node_is_null" = "targetNode is null";
"current_cms_node_is_null" = "Current server node is null";
"mcrStFirmwareVersion" = "Service Tool Version: %s";
"mcrStFirmwareDatetime" = "Last Service Tool Update: %s";
"bstFirmwareVersion" = "Bluetooth Version: %s";
"bstFirmwareDatetime" = "Last Bluetooth Update: %s";
"space" = "\\u0020";
"loraOption" = "LORA";
"hsplOption" = "HSPL";
"no_mipl_devices" = "There are no MIPL devices.";
"mc_pa_antenna" = "PA Antenna: %s.";
"mipl_line_output_0" = "0";
"mipl_line_output_1" = "1";
"mipl_line_output_2" = "2";
"fwUpdateSuccessfully" = "The device has been successfully updated!";
"fw_device_update_success" = "Firmware update was successful!";
"fw_device_update_error" = "Error updating firmware on the device!";
"fw_ST_upload_progress" = "Uploading firmware %d to Service Tool.";
"fw_MCR_upload_progress" = "%d out of %d firmware packets have been uploaded to the antenna.";
"fw_upload_started" = "Uploading firmware file to Service Tool.";
"add_mipl_to_line" = "Associate MIPL with an output line";
"install_mc_ccm_first_message" = "Lighting system installation always starts from the main antenna (server). Select the location of the main antenna and follow the installation steps.";
"loginValidateButtonText" = "Validate Account";
"continueLoginValidationInfo" = "To continue, enter the password for your account. The validation request is valid until %s.";
"expiredTimeLoginValidationInfo" = "Validation time has expired. Please regenerate the QR code.";
"qr_code_invalid" = "Error: Incorrect QR code for authentication!";
"qr_code_expired" = "Error: The QR code has expired. Regenerate the authentication code.";
"qr_code_system_error" = "System error. Contact the administrator.";
"video_tutorials_label" = "Tutorials";
"video_steps_label" = "Mounting and Installation Steps";
"pa_number_title" = "Number of PAs";
"pa_number_label" = "Please enter the number of PAs to be installed in the system:";
"installation_mode_on_title" = "Enter Installation Mode!";
"installation_mode_off_title" = "Exit Installation Mode!";
"installation_mode_off_status" = "The server is not in install mode!";
"installation_mode_on_status" = "The server is in installation mode!";
"replaceEdit" = "Replace Mode";
"repeater_menu_item" = "Repeater";
"first_repeater_menu_item" = "Repeater 0";
"additional_repeater_menu_item" = "Repeater +";
"pa_menu_item" = "PA";
"gateway_menu_item" = "Gateway";
"pl_menu_item" = "PL Controller";
"turn_pa_all_on" = "ON";
"turn_pa_all_off" = "OFF";
"entire_pa" = "Entire PA";
"pa_voltage_parameter" = "U = %1$s";
"pa_intensity_parameter" = "I = %1$s";
"pa_resistance_parameter" = "cosq = %1$s";
"pa_name" = "Ignition Point";
"pa_control_auto" = "Automatic";
"pa_control_manual" = "Manual";
"installation_status" = "Installation Status";
"installation_components" = "Components";
"operation_service" = "Service Operations";
"stage_title" = "Server Installation %s";
"el_line_output_info" = "Activate/Deactivate PA outputs";
"qr_scan_title_label" = "Scan Device";
"qr_scan_proximity_label" = "Proximity Scan";
"error_title" = "ERROR!";
"check_current_pa" = "Check Installation";
"install_network_title" = "Network Installation";
"select_beneficiary_heading" = "Select Beneficiary";
"beneficiary_title" = "Beneficiary";
"select_commands_heading" = "Select Beneficiary Command";
"commands_title" = "Commands";
"general_verification_button_text" = "General Verification";
"install_button_text" = "Install";
"customize_button_text" = "Replace";
"add_button_text" = "Add";
"installed_label_status" = "Installed";
"not_installed_label_status" = "Not Installed";
"pending_label_status" = "Pending";
"duplicate_label_status" = "Duplicate";
"retry" = "Retry";
"startup_message_map_download" = "Map Downloading";
"startup_message_update_download" = "Update Downloading";
"startup_message_update_error" = "Application Update Error! Please try again!";
"lora_signal" = "LoRa Signal";
"qr_register_title" = "Pair your device by scanning the QR code from the Metrics app";
"active_commands_label" = "Active commands";
"install_command_name" = "Install command";
"service_command_name" = "Service command";
"audit_command_name" = "Audit command";
"unknown_command_name" = "Unknown command";
"urgent_command_priority" = "URGENT";
"regular_command_status" = "REGULAR";
"suspended_command_status" = "SUSPENDED";
"new_command_status" = "NEW";
"dashboard_command_status" = "Order Status:";
"dashboard_server_status" = "Server Status:";
"command_status_in_progress" = "IN PROGRESS";
"command_status_completed" = "COMPLETED";
"server_online" = "ONLINE";
"server_offline" = "OFFLINE";
"tutorials_label" = "Tutorials";
"finish_label" = "Finish";
"map_floating_dialog_title" = "Position the device";
"map_floating_dialog_description" = "Adjust the device's position on the map to indicate the correct location by long-pressing the marker.";
"map_action_button_label" = "Confirm Location";
"qr_manual_input_title" = "Manual input";
"qr_manual_input_description" = "The QR code is not displayed on the monitor?";
"not_allowed_device_type" = "Device type not allowed";
"report_issue" = "Report an issue";
"initial_inspection" = "Initial inspection";
"initial_inspection_server_details" = "The operator ensures that: \n\n - The server shows no signs of degradation as a result of transport/storage \n\n - The server is connected to electricity and internet via cable";
"initial_inspection_mnpl_details" = "The operator ensures that all controllers are available. \n\nWhen counting them, the operator ensures that the packaging of the controllers is not excessively damaged as a result of transport and/or storage.";
"initial_inspection_check_button_text" = "Checked";
"controller_install_success" = "Controller has been successfully installed.";
"continue_install" = "Do you want to continue with installation?";
"notifications" = "Notifications";
"project_notifications" = "Notifications project";
"notification_status_active" = "Active";
"notification_status_info" = "Info";
"notification_status_severe" = "Severe";
"notification_status_medium" = "Medium";
"notification_details" = "DETAILS >";
"notification_button_get_me_there" = "Get me there";
"notification_button_delete" = "Delete";
"notification_button_check" = "Check";
"notification_button_replace" = "Replace";
"notification_button_register_again" = "Reregister";
"notification_button_sync" = "Sync";
"issue_on_server_installation_title" = "Server Installation";
"issue_on_server_installation_status" = "Server status";
"map_button_replace" = "Replace";
"map_button_reposition" = "Reposition";
"map_button_delete" = "Delete";
"server_register_status_error_410" = "Check your server's internet connection.";
"server_register_status_error_404" = "Check if the server has not already been registered.";
"server_register_status_error_401" = "You are not authorized for this operation.";
"server_activation_title" = "Server activation";
"server_activation_details" = "At this moment the server is being installed and the synchronization with the cloud is done.";
"scan_mnpl" = "Scan MNPL";
"place_mnpl" = "Place MNPL";
"save" = "Save";
"save_and_finish" = "Save and finish";
"device_proximity_error" = "Error: The limit of devices on this node or region has been reached!";
"bluetooth_disabled_error" = "Bluetooth not enabled! Please enable it in settings!";
"bluetooth_permission_error" = "Bluetooth access not granted! Please enable bluetooth or nearby devices permissions in setings!";
"missing_available_operations" = "There are no available operations! Contact the administrator!";
"missing_operation_error" = "The operation could not be found! Contact the administrator!";
"missing_operation_deviceslot_error" = "The operation doesn't have a device slot! Contact the administrator!";
"missing_phase_deviceslot_error" = "The operation phase doesn't have a device slot! Contact the administrator!";
"missing_operation_device_error" = "The operation device could not be found! Contact the administrator!";
"missing_device_type_error" = "Device type couldn't be identified! Contact the administrator!";
"wrong_operation_device_error" = "The scanned device doesn't correspond to current operation! Please scan another device from the current node!";
"unsupported_operation" = "Operation not permitted!";
"wrong_scanned_serials" = "The scanned device serials are wrong. Please try again!";
"missing_node_device_error" = "The node device could not be found! Contact the administrator!";
"missing_node_error" = "The node could not be found! Contact the administrator!";
"missing_device_serial" = "The device serial number could not be found! Contact the administrator!";
"node_location_error" = "The node location is not set!";
"parent_device_data_error" = "Parent device is null! Contact the administrator!";
"child_device_data_error" = "Couldn't create child devices! Contact the administrator!";
"new_device_serial_error" = "Couldn't find new device serial! Contact the administrator!";
"wifi_scan_failed" = "Kamsens scan has failed!";
"kamsens_unavailable" = "Kamsens sensor couldn't be found!";
"network_unavailable" = "Couldn't connect to Kamsens sensor! Please try again!";
"kamsens_wifi_off" = "In order to connect to the Kamsens sensor, you must have the WiFi open.";
"firebase_error_authentication_canceled" = "Please restart the application and accept instructions displayed on your screen in order to check for updates!";
"firebase_error_authentication_failure" = "Error signing in the google account. Please try again!";
"firebase_error_installation_canceled" = "Please restart the application and accept installation of the application update.";
"firebase_error_installation_failure" = "Error installing application update. Please try again!";
"firebase_error_update_general_error" = "Application Update General Error! Please try again or contact the administrator!";
"update_store_message" = "Please update the application from the Play Store!";
"report_summary" = "Summary";
"report_devices" = "Devices";
"report_modify" = "Changes";
"report_no_changes" = "We inform you that the installation carried out so far has been executed in accordance with the technical project, complying with all its specifications and requirements.";
"report_non_conform_title" = "Non-conforming installation:";
"report_non_conform_details" = "Following the inspections carried out, it has been found that the installation of certain devices was not performed according to the requirements, or some modules were not replaced as specified in the project. Please address these issues as soon as possible and confirm the completion of the intervention. The details of the non-conformities are presented in the attached photos.";
"report_initial_inspection_title" = "Site order:";
"report_initial_inspection_details" = "Following the inspections carried out, it has been found that 10 lamps were installed in a different position than the one specified in the technical project (PTH). In order to validate this modification, a site directive needs to be issued. The necessary steps for its issuance are currently being carried out by our company.";
"report_no_installation_record" = "There is no installation record available.";
"report_number_of_approved_photos" = "The number of photos approved:";
"report_number_of_not_approved_photos" = "The number of photos not approved:";
"report_number_of_not_review_photos" = "The number of photos not reviewed:";
"report_number_of_uploaded_photos" = "The number of photos uploaded:";
"report_total_number_of_devices" = "Total number of devices to be installed: ";
"report_already_installed_devices" = "Installed devices: ";
"spinner_dashboard_download" = "Downloading beneficiary data";
"spinner_steps_loading" = "Loading installation steps";
"command_finished" = "This command is finished!";
"dialog_exit_message" = "When you exit the app, you will need to re-enter your PIN when you return. Make sure you have an active internet connection.";
"non_compliance_photo" = "Number of non-conforming photos:";
"dialog_logout_title" = "You will be disconnected";
"dialog_logout_message" = "Warning! You will be disconnected, and your login data will be deleted.\n\nTo access the platform again, you will have to scan a QR code.";
"check_duplicated_nodes_on_map" = "Error syncing some modules. Check the map to identify problematic modules.";
"upload_cache_dialog" = "There is data not synced with the server. Do you want to sync it now?";
"server_sync_progress" = "Server data sync in progress. Please try again later.";
"syncing_data" = "Synchronizing data...";
"suspend_button_label" = "Suspend";
"suspend_reason_label" = "Reason of suspension";
"suspend_reason_empty" = "Please add the reason of suspension!";
"resume_command_label" = "Do you want to resume this command?";
"node_sync_error" = "The node will appear on map on next successful sync or login!";
"new_node" = "New node";
"another_device_already_installed_error" = "There is another device installed in the current location!";
"another_device_already_replaced_error" = "The device has already been replaced at the given location!";
"duplicated_device_error" = "The device has already been installed in another location!";
"serial_already_scanned_another_step_error" = "The serial was already scanned in a previous step!";
"node_distance_error" = "The distance between your location and the selected node is too far! Please get closer to the node!";
"device_slot_invalid_error" = "The device slot is invalid! Contact the administrator!";
"dashboard_install_city_hall" = "Installation in the city hall:";
"dashboard_install_proxi_city_hall" = "Installation near the city hall:";
"dashboard_install_field" = "Field installations:";
"eula_screen_title_label" = "TERMS & CONDITIONS";
"privacy_policy_screen_title_label" = "PRIVACY POLICY";
"title_my_account" = "My Account";
"title_menu_report_problem" = "Report a problem";
"title_menu_logout" = "Log out";
"title_menu_term_policies" = "Terms & Conditions";
"title_menu_privacy_policy" = "Privacy Policy";
"title_menu_my_commands" = "My Commands";
"please_wait_gps_acquired" = "Location accuracy is currently low. To enhance it, make sure you’re outdoors with a clear view of the sky.";
"exception_list_comands_is_empty" = "No active commands found";
"no_internet_connection" = "No internet connection";
"dialog_message_no_internet_connection" = "This action cannot be completed right now. Please check your internet connection and try again later.";